Greetings,
we need to upgrade XB24-ZB to Xbee3 modules on an industrial site, ~300 units are involved. We are using a Digi X4 ConnectPort which perfectly recognizes the Xbee3 Z3 device as a router and product type 0x00120000, one is also e.g. able to change parameters and store them on the Xbee 3 device. Unfortunately our sensor application, which talks via AT commands to the Xbee device, does not receive nor send back messages even though a link between the X4 and the Xbee 3 module has been established (it works perfectly with a XB24-ZB module at the same baud rate and parity settings). We checked all the XB24-ZB available parameters to be the same on a currently working XB24-ZB and on a not communicating Xbee 3 Zigbee 3.0. Would anyone have any idea? Many thanks!