A couple of key features of the ConnectPort X2e

I thought it might be good to mention a few things about the ConnectPort X2e:

  • There is no telnet functionality built into the ConnectPort X2e
  • The Web UI is disabled by default, a press of the white button on the front of the unit will enable it for the next 5 minutes
  • The device is discoverable using the Digi Device Discovery tool, but can not be configured unless the white button is pressed on the front of the unit
  • Devices running the firmware by default point to my.idigi.com, devices running by default point to developer.idigi.com. Updating the firmware alone will not change which hostname the device tries to connect to, a factory default is needed (or a reconfiguration)