AnywhereUsb/2 does not work after reboot

After rebooting my PC, the AnyWhereUSB configuration utility says “Driver status: Group Default is in use”.
The web interface indicates there is a connection with my PC, but the 2 status LED’s remain dark.
After using the Disconnect-button in the webinterface, the connection is re-established, the LED’s light up, and the USB stick is recognized.

Following the same procedure when the AnywhereUSB/2 and the PC are connected via crossed cable, the USB stick becomes automatically visible after a reboot.

What can I do to get the USB decices active after a reboot without having to do manual interventions?


Please refer to the knowledge base article on this issue.