Hi,
I installed the Realport redirection on WindowsME. All whent well but the serial port is registered as COM5!!!
Hyperterminal and all the other serial terminal programms in my possion only support up to COM4.
The PC only has 2 serial ports COM1 and COM2.
How can I configure Realport to COM3 or COM4.
Frank
Hi,
This problem can be solved by installing latest realport drivers available at ftp://ftp1.digi.com/support/driver/40002297_c.zip
Here you have option to assign any free port number to COM port. In device manager digi port properties you can change this settings. Normally In Win 98 and Win Me you can assign it as com3 and com4.
Hope this solves your problem…
bye
Shailesh