I thought I used mpi to set up the rates for the PC/Xem board. This is what I had on redhat 9.0 I am now on SUSE 10.0 and I do not find the port config… What is it called. mpi does not seem to work.
7:2345:respawn:/sbin/agetty -L 38400 ttyD004 wy50
8:2345:respawn:/sbin/agetty -L 38400 ttyD000 wy50
9:2345:respawn:/sbin/agetty -L 38400 ttyD001 wy50
10:2345:respawn:/sbin/agetty -L 38400 ttyD003 wy50
11:2345:respawn:/sbin/agetty -L 9600 ttyD006 wy50
12:2345:respawn:/sbin/agetty -L 19200 ttyD012 wy50
13:2345:respawn:/sbin/agetty -L 19200 ttyD016 wy50
14:2345:respawn:/sbin/agetty -L 19200 ttyD017 wy50
15:2345:respawn:/sbin/agetty -L 19200 ttyD020 wy50
16:2345:respawn:/sbin/agetty -L 19200 ttyD021 wy50
17:2345:respawn:/sbin/agetty -L 19200 ttyD022 wy50
D025:2345:respawn:/sbin/mgetty -x5 -s 57600 ttyD025 wy50
19:2345:respawn:/sbin/agetty -L 19200 ttyD026 ansii
20:2345:respawn:/sbin/agetty -L 19200 ttyD027 wy50
21:2345:respawn:/sbin/agetty -L 9600 ttyD008 wy50
22:2345:respawn:/sbin/agetty -L 9600 ttyD009 wy50
23:2345:respawn:/sbin/agetty -L 9600 ttyD013 wy50
24:2345:respawn:/sbin/agetty -L 9600 ttyD028 wy50
25:2345:respawn:/sbin/agetty -L 9600 ttyD029 wy50
26:2345:once:/etc/init.d/dgap_ditty
cat < /dev/ttyD018 > /dev/null & ditty 2400 ixon opost onlcr ttyD018
cat < /dev/ttyD023 > /dev/null & ditty 4800 ixon opost onlcr ttyD023
cat < /dev/ttyD024 > /dev/null & ditty 9600 maxcps 200 maxchar 100 ixon ixoff op
ost onlcr ttyD024
cat < /dev/ttyD010 > /dev/null & ditty 9600 maxcps 200 maxchar 100 ixon ixoff op
ost onlcr ttyD010
cat < /dev/ttyD030 > /dev/null & ditty term wy50 ttyD030
chmod 777 /dev/tprD030
chmod 777 /dev/tprD010
chmod 777 /dev/tprD024
I have the board configured with d instead of D
Thanks,
Message was edited by: gerberb