XBee PRO 1 "ATCE1" give mi "ERROR"

XBee & XBee Gateway XBee - DigiMesh
1

Hi everibody,
I have a problem with my Xbee PRO S1 module.
I use minicom.
I wrote these command:
+++ (OK)
ATCE (0)
ATCE1 (ERROR)
ATCE0 (OK)

I didn’t understand why ATCE1 returns me error, meanwhile ATCE0 works perfectly.
Can anyone help me?

Kind regards!

2

which firmware version your using XBP24 or XBP24-DM?

3

Hi csreddy,
thanks a lot for your availability. But what is the way to find out the firmware of my XBee module? I haven’t an XBee Explorer, so I can’t link Xbee with USB and I can’t use XCTU Software. Now, I use minicom or cutecom to communicate with my module.

4

Hi csreddy,
thanks a lot for your availability. But what is the way to find out the firmware of my XBee module? I haven’t an XBee Explorer, so I can’t link Xbee with USB and I can’t use XCTU Software. Now, I use minicom or cutecom to communicate with my module.

5

You need to obtain an interface board so you can connect the XBee module to a PC.

The AT command to issue to get the version is ATVR.

6

You need to obtain an interface board so you can connect the XBee module to a PC.

The AT command to issue to get the version is ATVR.