Topics tagged receive

Topic	Replies	Views	Activity
I cannot receive data packet by using XBee pro S3B. XBee & XBee Gateway xbee-pro-s3b , receive	1	218	July 25, 2022
Sleeping End device sometime does not received response send from co-ordinator. XBee Programamble (S2C & 900 HP) device , response , end , receive , send	3	280	January 7, 2022
Receiving multiple time the same frame with XBEE S2C XCTU s2c , xbee-api-mode , receive , receiver	3	333	November 15, 2021
Full list of differences between AP=4 and AP=1 on XBee 3 XBee & XBee Gateway api-mode , receive , micropython , xbee3	1	278	September 27, 2021
Error while Receive SMS via python "SMS Received: xxx: POWER OFF,Not executed" Digi TransPort WR (Series) python , sms , not , receive , executed	3	366	July 7, 2021
Sleep mode with several end devices and a gateway - XBee - DigiMesh power , data , low_power_mode , receive , transmission-request	2	433	March 1, 2021
XBEE3 receive() missing senders network in 802.15.4 vs DigiMesh XBee - 802.15.4 transmit , receive , 802-15-4 , xbee3	3	398	February 16, 2021
Problem with mesh networking when multiple devices are transmitting at same time XBee - DigiMesh xbee , digimesh , meshnetwork , xbee-sleep , receive	9	702	December 8, 2020
At XBee3 router device micropython ps=1 at start-up, transmission to coord takes ~ 10sec.. too slow! XBee - Zigbee python , firmware , xctu , transmit , receive	3	446	August 20, 2020
Time between request and receive varies XBee - DigiMesh xbee , request , time , receive	2	414	July 9, 2020
Send and receive failed XTend - , failed , receive , xtp9b	2	527	May 28, 2020
Receive data pause XBee - 802.15.4 xbee-s1 , transmit , receive , matlab	0	405	May 24, 2018
How do connect to a non-digi Zigbee device using CP X4 and pull data? XBee & XBee Gateway zigbee , packet , receive	2	730	April 24, 2018
receiving uknown information from xbee's connected to atmega16 MCU. Interface/Development Boards interrupt , xbee , receive	0	366	February 21, 2018
Receiving interrupt for MCU XBee & XBee Gateway interrupt , xbee , pin , receive , wake-up	1	576	February 6, 2018
Does UDP messages sent from the network get converted to serial for serial ports? Portserver TS udp , transmit , receive , serial-communication	0	519	January 25, 2018
how to send and receive data in 1 program on xbee s2 XBee Programamble (S2C & 900 HP) xbee , zigbee , s2 , transmit , receive	6	946	January 19, 2017
Difference between sent and received frame XBee - Zigbee xbee , api-mode , frame , receive	1	568	July 28, 2016
handle all received packets from at command XBee & XBee Gateway xbee , s2c , receive , at-command	5	843	March 31, 2016
S3B will transmit not receive XBee - DigiMesh no , receive , tx , rx	1	631	January 6, 2016
Xbee 900HP Transparent Mode receiving data XBee - DigiMesh xbee , xbee-900hp , 900hp , receive , transparent	1	581	December 1, 2015
Packetloss at Receiver Side XBee - 802.15.4 arduino-xbee , zigbee , packet , recieve , receive	1	693	October 23, 2015
Minimizing receiver delay XBee - DigiMesh xbee , delay , receive	5	998	October 12, 2015
How do I use ConnectPort X2e Ethernet/Wifi to receive data send from multiple Xbee RF module? Python python , connectport , xbee , x2e , receive	5	3354	June 25, 2015
How receive data from another zigbee socs(Atmel) to ConnectPort X4 gateway XBee & XBee Gateway connectport , xbee , receive	4	1053	March 27, 2015
Receving String correctly on RS232 Rabbit rs232 , serial , receive , string	1	700	February 3, 2015
Which Module receive the data first XBee & XBee Gateway xbee , speed , receive , distance	3	756	October 10, 2014
Reassembling Zigbee received packet Other & Legacy Products zigbee , packet , frame , receive	0	472	September 2, 2014
Every time a Zigbee module joins the ConnectPort X2 initiated Zigbee network I receive a packet that was not sent. Python socket , zigbee , connectport-x2 , packet , receive	1	2331	August 11, 2014